The PCI DP Series Dispenser Sump provides secondary containment beneath fuel dispensers, enclosing piping connections, penetration fittings, and shear valves with access for installation, inspection, and service.

The Dispenser Pan design is PCI’s shallowest dispenser sump that accommodates a flex connector. Built from 100% corrosion-resistant fiberglass, the DP Series offers an economical option for installations requiring shallow burial depth.

Shallow Burial Design

The shallow body accommodates a flex connector while reducing the required installation depth, providing flexibility where deeper excavation is limited.

Dual Conduitless Entry

Conduit mounting channels are integrated into both ends of the steel frame, allowing electrical entry into the dispenser without penetrating the sump walls.

Single-Piece Sump Body

The fiberglass body is constructed as a single piece, eliminating body seams and reducing potential entry points for outside moisture.

Duo-Molded Fiberglass Construction

PCI’s Duo-Molded Technology combines two layers of fiberglass with high glass content for strength and fuel resistance.

Brite-White Interior

PCI’s Brite-White interior reflects light for better visibility and helps identify leak points during inspection and service.

Universal Stabilizer Bars

Universal stabilizer bars provide three-axis adjustment to accommodate multiple product lines without displacing piping. The assembly supports proper load transfer during dispenser impact and is ordered separately.

Composite Rainlip

A 1-inch composite rainlip helps prevent surface runoff from entering the sump and resists rust and corrosion.

Factory Pre-Plumbed Options

Full and partial factory pre-plumbing are available to reduce field assembly and installation time. Each pre-plumbed sump is built to your specifications and hydrostatically and pressure tested before shipment.

Double Wall Options

Double wall models are available for installations requiring interstitial monitoring, with configurations supporting dry, vacuum, or fluid-filled monitoring. Required monitoring accessories are ordered separately.

Dispenser Compatibility

Available models include:

• DP174360: Gilbarco Encore, with a listed width of 17.5 inches and length of 36 inches.
• DP146360: Wayne Ovation, with a listed width of 14.75 inches and length of 36 inches.

Both models use the SVU-L stabilizer kit. Corresponding double wall models and additional dispenser configurations are available.

Specifications and Installation Resources

Download the product brochure and installation instructions for model dimensions, dispenser compatibility, stabilizer kits, and installation requirements.

Duo-Molded Technology

Our fiberglass sumps utilizes Duo-Molded Technology. Using premium raw materials with a high glass content, we create two layers of fiberglass, offering superior strength and fuel resistance.

‘BRITE-WHITE’ INTERIOR

Our signature ‘Brite-White’ interior reflects light for better visibility and makes identifying leak points easier.

100% Fiberglass

100% high-quality, non-corrosive fiberglass provides long-term reliable containment from fuel exposure without voiding warranty, warping, cracking or becoming brittle.

UNIVERSAL STABILIZER BARS

Universal stabilizer bars with 3-axis adjustment accommodate multi-product dispensers without displacing product lines and ensure proper load transfer in case of an impact from any direction.

SINGLE PIECE CONSTRUCTION

Constructed as a single piece which eliminates any seams, providing less places for water penetration.

1″ COMPOSITE RAINLIP

1″ Composite Rainlip protrudes from the bottom of the dispenser to prevent surface water from entering the sump. This also offers better protection against rust and corrosion than metallic rainlips.